SONY Vaio VPCEB29GS Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb29gs motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb29gs system board.
Related Laptop Model:
Vaio VPCEB45FX/WI
Vaio VPCEB1M1E
Vaio VPCEB3AFM/T
Vaio VPCEA3CFX
Vaio VPCEA37FX/V
Vaio VPCEB2S1E/WI
Vaio VPCEB24FD/T
Vaio VPCEB21FD/WI
Vaio VPCEB1E9R/BJ
Vaio VPCEB1M0E/WI
Vaio VPCEA35FL/L
Vaio VPCEB3AFX/BJ
Vaio VPCEB23FM
Vaio VPCEB2LGX
Vaio VPCEA40EL/L
Vaio VPCEB3DFX/BJ
Vaio VPCEB4M1E/PI
Vaio VPCEB3H4E
Vaio VPCEB14FD
Vaio VPCEB27FD/P
Vaio VPCEB1AGX
Vaio VPCEB3QFX/WI
Vaio VPCEB47GM
Vaio VPCEB26GM/T
Vaio VPCEB1AGGBI
Vaio VPCEA33FX/G
Vaio VPCEA21FD/BJ
Vaio VPCEB4S1E/BQ
Vaio VPCEA44FX/BJ
Vaio VPCEB2S1E/BQ
Vaio VPCEA25FGP
Vaio VPCEA27FL/P
SONY Vaio VPCEB29GS laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB29GS motherboard and SONY Vaio VPCEB29GS fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
