SONY Vaio VPCEB21FD Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb21fd motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb21fd system board.
Related Laptop Model:
Vaio VPCEB28FX/G
Vaio VPCEA2UFX/L
Vaio VPCEB24FX/T
Vaio VPCEB2YFX/BI
Vaio VPCEB1E9R/BJ
Vaio VPCEB2AFD/BQ
Vaio VPCEB26GX
Vaio VPCEB1PFX
Vaio VPCEB1E9E/BJ
Vaio VPCEB1JFX
Vaio VPCEA23EL/BI
Vaio VPCEB17FX/L
Vaio VPCEB2TFX/B
Vaio VPCEB4FFX/BJ
Vaio VPCEB21FD/WI
Vaio VPCEA4M1R/BJ
Vaio VPCEB2JFX/G
Vaio VPCEB3RFX/V
Vaio VPCEB14FX/BI
Vaio VPCEB11FD/BI
Vaio VPCEA3JGX/BJ
Vaio VPCEB12FX/WI
Vaio VPCEB3M1R/T
Vaio VPCEB33FD/WI
Vaio VPCEB25FX/WI
Vaio VPCEB4M1E/PI
Vaio VPCEB2S1R/WI
Vaio VPCEA30EL/BI
Vaio VPCEB3D4R
Vaio VPCEA21FX/T
Vaio VPCEB3BFX/W
Vaio VPCEB3BFX
SONY Vaio VPCEB21FD laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB21FD motherboard and SONY Vaio VPCEB21FD fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
