Toshiba Portege R935 Laptop Motherboard is Refurbished. the motherboard as a replacement for your toshiba laptop, this toshiba portege r935 motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original toshiba portege r935 system board.
Related Laptop Model:
Portege R935-p330
Portege R930-15d
Portege R930-11c
Portege R930-b682
Portege R930-10j
Portege R930-00v
Portege R930-05w
Portege R930-005
Portege R930-0c6
Portege R930-12q
Portege R930-0c3
Portege R930-08s
Portege R930-b679
Portege R930-08t
Portege R930-b589
Portege R930-13u
Portege R930
Portege R935-st2n02
Portege R930-15g
Portege R930-b685
Portege R935-p332
Portege R930-189
Portege R930-006
Portege R930-10p
Portege R930-117
Portege R930-b247
Portege R930-12w
Portege R930-s9330
Portege R930-0hl
Portege R930-126
Portege R930-s9320
Portege R930-s9331
Toshiba Portege R935 laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the Toshiba Portege R935 motherboard and Toshiba Portege R935 fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
