SONY VAIO VPCEC2TFX/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcec2tfx/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcec2tfx/wi system board.
Related Laptop Model:
VAIO VPCEC1R/BJ
VAIO VPCEC2QGX
VAIO VPCEC4S1E/BJ
VAIO VPCEC2HFX/BI
VAIO VPCEC3BFX
VAIO VPCEC3S0E/WI
VAIO VPCEC2M1R/WI
VAIO VPCEC2E9E/BJ
VAIO VPCEC3BFX/BJ
VAIO VPCEC1A5E
VAIO VPCEC1M1E/WI
VAIO VPCEC3S1E/BJ
VAIO VPCEC2SFX/BI
VAIO VPCEC2PGX/BI
VAIO VPCEC2GGX/BI
VAIO VPCEC2S0E/WI
VAIO VPCEC4S0E/WI
VAIO VPCEC2LGX/BI
VAIO VPCEC2A4E
VAIO VPCEC2S1R/BJ
VAIO VPCEC2RFX/BI
VAIO VPCEC4M1E/BJ
VAIO VPCEC2FFX/BI
VAIO VPCEC290X
VAIO VPCEC2MGX
VAIO VPCEC2S1E/BJ
VAIO VPCEC22FX/WI
VAIO VPCEC2KGX/BI
VAIO VPCEC4AFX
VAIO VPCEC2SFX
VAIO VPCEC2JGX/BI
VAIO VPCEC1MR/WI
SONY VAIO VPCEC2TFX/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY VAIO VPCEC2TFX/WI motherboard and SONY VAIO VPCEC2TFX/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
