SONY VAIO VPCEC2S1R/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcec2s1r/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcec2s1r/bj system board.
Related Laptop Model:
VAIO VPCEC4C5E
VAIO VPCEC3L1E/WI
VAIO VPCEC2C5E
VAIO VPCEC2GGX
VAIO VPCEC2JFX/WI
VAIO VPCEC3C5E
VAIO VPCEC2QGX/BI
VAIO VPCEC2QGX
VAIO VPCEC2SFX/WI
VAIO VPCEC3AFX
VAIO VPCEC1B4E
VAIO VPCEC2JFX/BI
VAIO VPCEC25FD
VAIO VPCEC2TFX
VAIO VPCEC290X
VAIO VPCEC2NGX
VAIO VPCEC2M1E/WI
VAIO VPCEC2HFX
VAIO VPCEC3E9E/BJ
VAIO VPCEC2S1E/BJ
VAIO VPCEC2KGX
VAIO VPCEC2RFX/BI
VAIO VPCEC4M1R/WI
VAIO VPCEC1C4E
VAIO VPCEC22FX
VAIO VPCEC390X
VAIO VPCEC3DFX
VAIO VPCEC1Z1E/BJ
VAIO VPCEC4BFX
VAIO VPCEC4S0E/WI
VAIO VPCEC2LGX/BI
VAIO VPCEC1M1E/WI
SONY VAIO VPCEC2S1R/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY VAIO VPCEC2S1R/BJ motherboard and SONY VAIO VPCEC2S1R/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
