SONY VAIO VPCEC2M1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcec2m1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcec2m1r/wi system board.
Related Laptop Model:
VAIO VPCEC2HFX
VAIO VPCEC2MGX
VAIO VPCEC2HFX/BI
VAIO VPCEC2S1E/BJ
VAIO VPCEC1Z1E/BJ
VAIO VPCEC1C4E
VAIO VPCEC4L1E/WI
VAIO VPCEC25FX
VAIO VPCEC3CFX
VAIO VPCEC1MR/WI
VAIO VPCEC2GGX
VAIO VPCEC3BFX
VAIO VPCEC25FX/WI
VAIO VPCEC4CFX/BJ
VAIO VPCEC3BFX/BJ
VAIO VPCEC2SFX
VAIO VPCEC2RFX
VAIO VPCEC2S0E/WI
VAIO VPCEC1S1E/BJ
VAIO VPCEC2MGX/BI
VAIO VPCEC1A5E
VAIO VPCEC4AFX/BJ
VAIO VPCEC2SFX/WI
VAIO VPCEC25FX/BI
VAIO VPCEC2M1E/WI
VAIO VPCEC2LGX
VAIO VPCEC2QGX/BI
VAIO VPCEC2SFX/BI
VAIO VPCEC3Z1E/BJ
VAIO VPCEC2A4E
VAIO VPCEC3DFX
VAIO VPCEC2C5E
SONY VAIO VPCEC2M1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY VAIO VPCEC2M1R/WI motherboard and SONY VAIO VPCEC2M1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
