SONY VAIO VPCEC25FX/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcec25fx/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcec25fx/bi system board.
Related Laptop Model:
VAIO VPCEC1C4E
VAIO VPCEC2KGX
VAIO VPCEC22FX/BI
VAIO VPCEC2JFX/BI
VAIO VPCEC2JGX/BI
VAIO VPCEC3CFX
VAIO VPCEC3M1R/WI
VAIO VPCEC1A4E
VAIO VPCEC3M1E/BJ
VAIO VPCEC3CFX/WI
VAIO VPCEC3E9E/BJ
VAIO VPCEC1MR/WI
VAIO VPCEC4L1E/WI
VAIO VPCEC4CFX
VAIO VPCEC1A5E
VAIO VPCEC2MGX
VAIO VPCEC4S1E/BJ
VAIO VPCEC2TFX/WI
VAIO VPCEC4A4E
VAIO VPCEC4C5E
VAIO VPCEC3BFX/BJ
VAIO VPCEC2A4E
VAIO VPCEC2QGX/BI
VAIO VPCEC2RFX
VAIO VPCEC3S0E/WI
VAIO VPCEC2JFX/WI
VAIO VPCEC2PGX/BI
VAIO VPCEC25FD
VAIO VPCEC4BFX/BJ
VAIO VPCEC4M1E/BJ
VAIO VPCEC2QGX
VAIO VPCEC4AFX
SONY VAIO VPCEC25FX/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY VAIO VPCEC25FX/BI motherboard and SONY VAIO VPCEC25FX/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
