SONY Vaio VPCEB4M1E/T Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4m1e/t motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4m1e/t system board.
Related Laptop Model:
Vaio VPCEB4MFX/L
Vaio VPCEB1QGX/BI
Vaio VPCEB1BGX
Vaio VPCEA21FD/BJ
Vaio VPCEB26GM/BI
Vaio VPCEA3S1E/L
Vaio VPCEB11GX/T
Vaio VPCEB2S1E/PI
Vaio VPCEA2
Vaio VPCEB23FX/PI
Vaio VPCEB44FX/T
Vaio VPCEB1AFX/B
Vaio VPCEA3AFX/WI
Vaio VPCEB11FM/BI
Vaio VPCEB2F4E
Vaio VPCEB2FFX/B
Vaio VPCEB33FD/G
Vaio VPCEA33FD/B
Vaio VPCEA45FL/B
Vaio VPCEB3PGX/BJ
Vaio VPCEB4J1R/BQ
Vaio VPCEB3AFD
Vaio VPCEA33FX/W
Vaio VPCEB2TFX/W
Vaio VPCEA27FL
Vaio VPCEB23FX/BI
Vaio VPCEB45FGP
Vaio VPCEB15FB
Vaio VPCEB13EL/WI
Vaio VPCEA35FL
Vaio VPCEB3E1E/PI
Vaio VPCEB4E1E/WI
SONY Vaio VPCEB4M1E/T laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4M1E/T motherboard and SONY Vaio VPCEB4M1E/T fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
