SONY Vaio VPCEB4M1E/PI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4m1e/pi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4m1e/pi system board.
Related Laptop Model:
Vaio VPCEBFX/G
Vaio VPCEB4L1R/T
Vaio VPCEB35FX/BJ
Vaio VPCEA3LGX/BJ
Vaio VPCEB27FD/P
Vaio VPCEB1AGGBI
Vaio VPCEB17FL/WI
Vaio VPCEA47FX/G
Vaio VPCEB4M1R/BQ
Vaio VPCEB3AFX/WI
Vaio VPCEA45FX/T
Vaio VPCEB1HFX/BI
Vaio VPCEA4M1R/BJ
Vaio VPCEB19FX
Vaio VPCEA46FM/W
Vaio VPCEB35FD/T
Vaio VPCEB26FX/T
Vaio VPCEA23FB/W
Vaio VPCEB26GX/WI
Vaio VPCEA2UFX/L
Vaio VPCEB2RFX/W
Vaio VPCEA1S1E/B
Vaio VPCEB3QFX/WI
Vaio VPCEA36FM/V
Vaio VPCEA37FL/V
Vaio VPCEB21FD/BQ
Vaio VPCEB2SFX/G
Vaio VPCEB2GFX
Vaio VPCEB3Z1E/BQ
Vaio VPCEB1M1E/WI
Vaio VPCEB3MFX/BJ
Vaio VPCEB3M1E/WI
SONY Vaio VPCEB4M1E/PI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4M1E/PI motherboard and SONY Vaio VPCEB4M1E/PI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
