SONY Vaio VPCEB4L1R/T Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4l1r/t motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4l1r/t system board.
Related Laptop Model:
Vaio VPCEB15FB
Vaio VPCEA21FD/WI
Vaio VPCEB15FM/T
Vaio VPCEA23FB/G
Vaio VPCEA1S1E/G
Vaio VPCEB4L1R/T
Vaio VPCEB3GGX/BJ
Vaio VPCEB3J1E/T
Vaio VPCEB16FD/G
Vaio VPCEA20EL/WI
Vaio VPCEB1M1R/BJ
Vaio VPCEB1TGX/B
Vaio VPCEA3CFX/B
Vaio VPCEB15FM/BI
Vaio VPCEB2C4E
Vaio VPCEB2TFX/BI
Vaio VPCEA25FX/BI
Vaio VPCEB1E1R/BJ
Vaio VPCEB26GM/WI
Vaio VPCEA46FM/W
Vaio VPCEB43FX/WI
Vaio VPCEA2S1R/G
Vaio VPCEB43FX/BJ
Vaio VPCEB3E9E/BQ
Vaio VPCEA43FB/L
Vaio VPCEA3BFX/WI
Vaio VPCEA3M1R/WI
Vaio VPCEB35FD
Vaio VPCEA3VFX/BJ
Vaio VPCEA23FB/B
Vaio VPCEB1E9J/BJ
Vaio VPCEB4J1E/WI
SONY Vaio VPCEB4L1R/T laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4L1R/T motherboard and SONY Vaio VPCEB4L1R/T fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
