SONY Vaio VPCEB4L1E/T Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4l1e/t motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4l1e/t system board.
Related Laptop Model:
Vaio VPCEB4C4E
Vaio VPCEB35FGP
Vaio VPCEB4B4E
Vaio VPCEB4X8E/BQ
Vaio VPCEB2TFX/L
Vaio VPCEB15FM/BI
Vaio VPCEB27FD/G
Vaio VPCEB1B4E
Vaio VPCEB35FD/BJ
Vaio VPCEB24FD/PI
Vaio VPCEB1E1R/T
Vaio VPCEA2VFX
Vaio VPCEB15FM/WI
Vaio VPCEA3JGX/BJ
Vaio VPCEB27FX/W
Vaio VPCEB2AFD/WI
Vaio VPCEB3FGX/BJ
Vaio VPCEB33GX
Vaio VPCEB23FX/PI
Vaio VPCEA2JFX/P
Vaio VPCEB11FX
Vaio VPCEA33FD/B
Vaio VPCEB2JFX/P
Vaio VPCEB37FX
Vaio VPCEB2SFX/P
Vaio VPCEA3L1E/P
Vaio VPCEB21FD/BQ
Vaio VPCEB13FX/BIC
Vaio VPCEA2UFX/W
Vaio VPCEB1MFX/BI
Vaio VPCEA33FB/B
Vaio VPCEB31FX
SONY Vaio VPCEB4L1E/T laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4L1E/T motherboard and SONY Vaio VPCEB4L1E/T fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
