SONY Vaio VPCEB4AFD/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb4afd/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb4afd/w system board.
Related Laptop Model:
Vaio VPCEB3JGX/BJ
Vaio VPCEA3CFX/P
Vaio VPCEA3M1E/L
Vaio VPCEA2JFX/G
Vaio VPCEA2FFX/B
Vaio VPCEA4AFX/B
Vaio VPCEA23FB/G
Vaio VPCEA3M1E/P
Vaio VPCEA3EGX
Vaio VPCEA3B4E
Vaio VPCEB2Z1R/B
Vaio VPCEA3M1E/G
Vaio VPCEA33FB
Vaio VPCEB11FX/T
Vaio VPCEA3TFX
Vaio VPCEA30EL/BI
Vaio VPCEA36FX/B
Vaio VPCEB4E1E/WI
Vaio VPCEB3J0E
Vaio VPCEB35FGP
Vaio VPCEA20EL
Vaio VPCEB2AFD/WI
Vaio VPCEB11GX
Vaio VPCEA1S1R/G
Vaio VPCEA2QGX/BI
Vaio VPCEA27FL
Vaio VPCEB3J1E/WI
Vaio VPCEB2SFX/L
Vaio VPCEA46FM
Vaio VPCEB3SGX
Vaio VPCEA3M1R/WI
Vaio VPCEB13EL
SONY Vaio VPCEB4AFD/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB4AFD/W motherboard and SONY Vaio VPCEB4AFD/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
