SONY Vaio VPCEB47GM/T Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb47gm/t motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb47gm/t system board.
Related Laptop Model:
Vaio VPCEB44FX
Vaio VPCEA4S1E/B
Vaio VPCEA22FX/L
Vaio VPCEB33FX/BJ
Vaio VPCEB2RFX/L
Vaio VPCEB3EFX
Vaio VPCEA2UFX/G
Vaio VPCEB13EB/WI
Vaio VPCEA31FX/BJ
Vaio VPCEB4Z1E/BQ
Vaio VPCEB1S0E/BJ
Vaio VPCEB2B4E
Vaio VPCEA25FB/B
Vaio VPCEB2E1R/WI
Vaio VPCEB12FD/W
Vaio VPCEA3VFX
Vaio VPCEA3FFX/BJ
Vaio VPCEB12FD/BI
Vaio VPCEA25FX/T
Vaio VPCEA48FX
Vaio VPCEB1S1R/BJ
Vaio VPCEB3B4E
Vaio VPCEB2M0E
Vaio VPCEA4AFX/B
Vaio VPCEA2LGX/BI
Vaio VPCEB3HGX/BJ
Vaio VPCEB1RGX
Vaio VPCEB1NFX
Vaio VPCEB14FX/T
Vaio VPCEA36FX/WI
Vaio VPCEB4E1R/BQ
Vaio VPCEB3RFX/V
SONY Vaio VPCEB47GM/T laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB47GM/T motherboard and SONY Vaio VPCEB47GM/T fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
