SONY Vaio VPCEB3S1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb3s1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb3s1r/wi system board.
Related Laptop Model:
Vaio VPCEB12FD/T
Vaio VPCEB19GS
Vaio VPCEA31FX/WI
Vaio VPCEA31FX
Vaio VPCEB1AGX
Vaio VPCEB11FM/T
Vaio VPCEA36FX/G
Vaio VPCEB2M0E/T
Vaio VPCEA3M1E/V
Vaio VPCEA2UFX/L
Vaio VPCEB2L9E/BQ
Vaio VPCEA2M1R/BJ
Vaio VPCEA2MGX/BI
Vaio VPCEB27FD/W
Vaio VPCEB4LFX/BJ
Vaio VPCEB4HGX
Vaio VPCEB4EFX
Vaio VPCEA2KGX/L
Vaio VPCEA46FGW
Vaio VPCEB27FX/G
Vaio VPCEA3S1R/L
Vaio VPCEA290L
Vaio VPCEB45FX/T
Vaio VPCEB4Z1R/B
Vaio VPCEA36FX/B
Vaio VPCEB4L1R/T
Vaio VPCEA3BFX
Vaio VPCEA2PGX
Vaio VPCEB3L0E/BQ
Vaio VPCEB4Z0E/BQ
Vaio VPCEA40EL/B
Vaio VPCEA3S1E/W
SONY Vaio VPCEB3S1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB3S1R/WI motherboard and SONY Vaio VPCEB3S1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
