SONY Vaio VPCEB3J0E/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb3j0e/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb3j0e/wi system board.
Related Laptop Model:
Vaio VPCEA3M1E
Vaio VPCEA27FL/L
Vaio VPCEB16FD/L
Vaio VPCEB1S0E/WI
Vaio VPCEB26GX/T
Vaio VPCEA4S1E/B
Vaio VPCEB1S0E/BJ
Vaio VPCEA3M1R/BJ
Vaio VPCEB18FD/WI
Vaio VPCEA4M1R/PI
Vaio VPCEA37FL/V
Vaio VPCEB29GS
Vaio VPCEB37FGW
Vaio VPCEA47FX/L
Vaio VPCEB2E1R/WI
Vaio VPCEB3BFX
Vaio VPCEB3M1R/T
Vaio VPCEB2M0E/WI
Vaio VPCEA390L
Vaio VPCEA27FX
Vaio VPCEB24FX/PI
Vaio VPCEB37FD/G
Vaio VPCEB1JFX/G
Vaio VPCEB4HGX/BJ
Vaio VPCEB1AFX
Vaio VPCEB27FGW
Vaio VPCEB43FX/BJ
Vaio VPCEB4KFX
Vaio VPCEB32FX
Vaio VPCEA46FM/P
Vaio VPCEA2QGX
Vaio VPCEB33FD/B
SONY Vaio VPCEB3J0E/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB3J0E/WI motherboard and SONY Vaio VPCEB3J0E/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
