SONY Vaio VPCEB3E1E/PI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb3e1e/pi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb3e1e/pi system board.
Related Laptop Model:
Vaio VPCEB22FX
Vaio VPCEA4S1E/P
Vaio VPCEB190X
Vaio VPCEB18FD/WI
Vaio VPCEA3Z1R/BQ
Vaio VPCEA2KGX/L
Vaio VPCEB2S1E/WI
Vaio VPCEA3CFX/V
Vaio VPCEB4Z1R/B
Vaio VPCEB3DFX/BJ
Vaio VPCEB3C5E
Vaio VPCEB29GS
Vaio VPCEB25FX/WI
Vaio VPCEA3MGX
Vaio VPCEB24FD/PI
Vaio VPCEB37FGW
Vaio VPCEA2C5E
Vaio VPCEB47GM
Vaio VPCEB33FX/T
Vaio VPCEB26FX/WI
Vaio VPCEB2S1R/WI
Vaio VPCEA33FB/V
Vaio VPCEA3VFX
Vaio VPCEB42FX/WI
Vaio VPCEA25FL/B
Vaio VPCEA27FL/B
Vaio VPCEA25FX/WI
Vaio VPCEB2G4E
Vaio VPCEB42FX/T
Vaio VPCEB44FX/WI
Vaio VPCEA47FX/V
Vaio VPCEA31FX
SONY Vaio VPCEB3E1E/PI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB3E1E/PI motherboard and SONY Vaio VPCEB3E1E/PI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
