SONY Vaio VPCEB3AFD/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb3afd/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb3afd/bj system board.
Related Laptop Model:
Vaio VPCEB29FX
Vaio VPCEA1S1R/L
Vaio VPCEA390S
Vaio VPCEB27FD/P
Vaio VPCEA3EGX/BJ
Vaio VPCEB46FX
Vaio VPCEB16FX/B
Vaio VPCEB26GM/T
Vaio VPCEB3G4E
Vaio VPCEB2AFD
Vaio VPCEB11GD/BI
Vaio VPCEB4J1E/PI
Vaio VPCEB3A4R
Vaio VPCEA48FX
Vaio VPCEA2S1E/G
Vaio VPCEA36FM/L
Vaio VPCEA1S1R/B
Vaio VPCEB4J1R/BQ
Vaio VPCEB4E1R/BQ
Vaio VPCEA36FM/G
Vaio VPCEA290S
Vaio VPCEA3BFX/WI
Vaio VPCEB3SGX/BJ
Vaio VPCEA3C4E
Vaio VPCEB14FX/BI
Vaio VPCEB28FX/P
Vaio VPCEA1S1R/P
Vaio VPCEB43FD/WI
Vaio VPCEA3CFX/L
Vaio VPCEA4M1R/BJ
Vaio VPCEA43FX
Vaio VPCEB16FD/L
SONY Vaio VPCEB3AFD/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB3AFD/BJ motherboard and SONY Vaio VPCEB3AFD/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
