SONY Vaio VPCEB37FX/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb37fx/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb37fx/wi system board.
Related Laptop Model:
Vaio VPCEB43FD/BJ
Vaio VPCEB16FX/L
Vaio VPCEA31FX/BJ
Vaio VPCEA27FX/P
Vaio VPCEB23FM/WI
Vaio VPCEA390X
Vaio VPCEA2JFX/P
Vaio VPCEB21FD/WI
Vaio VPCEB3RFX/V
Vaio VPCEA3CFX/V
Vaio VPCEB33FX/BJ
Vaio VPCEA21FD
Vaio VPCEB2M0E/WI
Vaio VPCEA46FG
Vaio VPCEA33FD/V
Vaio VPCEB4L1R/T
Vaio VPCEB2B4E
Vaio VPCEB32FX/WI
Vaio VPCEB13FX/BIC
Vaio VPCEB3EFX/BJ
Vaio VPCEB33FM/BJ
Vaio VPCEB3SGX/BJ
Vaio VPCEB4M1R/BQ
Vaio VPCEA36FX/W
Vaio VPCEA45FX/T
Vaio VPCEA20FB/BI
Vaio VPCEB1E8E/WI
Vaio VPCEA3HGX/BJ
Vaio VPCEA45FX/WI
Vaio VPCEA490X
Vaio VPCEB3GGX/BJ
Vaio VPCEA47FX/P
SONY Vaio VPCEB37FX/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB37FX/WI motherboard and SONY Vaio VPCEB37FX/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
