SONY Vaio VPCEB37FX/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb37fx/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb37fx/bj system board.
Related Laptop Model:
Vaio VPCEB2L9E/BQ
Vaio VPCEB31FD/BJ
Vaio VPCEA33FX/V
Vaio VPCEB4X1E/BQ
Vaio VPCEB3M1R/T
Vaio VPCEA20EL/WI
Vaio VPCEA4DGX/BJ
Vaio VPCEA23FB
Vaio VPCEB26FX/PI
Vaio VPCEB4Z0E/BQ
Vaio VPCEB4L1E/BQ
Vaio VPCEB24FD
Vaio VPCEB28FX/P
Vaio VPCEB4E1E/WI
Vaio VPCEB1E0E
Vaio VPCEA45FL/W
Vaio VPCEA3BFX/T
Vaio VPCEB4S1R/WI
Vaio VPCEB13FGBI
Vaio VPCEB2TFX/BI
Vaio VPCEB2M0E/PI
Vaio VPCEB11FD/WI
Vaio VPCEB28FX/L
Vaio VPCEA1S1R/P
Vaio VPCEB24FD/WI
Vaio VPCEA21FD/T
Vaio VPCEB2GFX/B
Vaio VPCEB2M0E/T
Vaio VPCEB45FX/WI
Vaio VPCEB1PFX
Vaio VPCEA3M1E/W
Vaio VPCEB3RFX
SONY Vaio VPCEB37FX/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB37FX/BJ motherboard and SONY Vaio VPCEB37FX/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
