SONY Vaio VPCEB33GX/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb33gx/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb33gx/wi system board.
Related Laptop Model:
Vaio VPCEB24FD/T
Vaio VPCEB36GX/BJ
Vaio VPCEB4MFX/B
Vaio VPCEB24FX/PI
Vaio VPCEA3AFX/BJ
Vaio VPCEA1S1E/W
Vaio VPCEA24FM/L
Vaio VPCEB45FX/WI
Vaio VPCEA2KGX/B
Vaio VPCEA2JFX/P
Vaio VPCEB1FGX/BI
Vaio VPCEA2S1R/B
Vaio VPCEA1S1R/B
Vaio VPCEB3JGX/BJ
Vaio VPCEB17FX/P
Vaio VPCEB15FX/T
Vaio VPCEB4CGX/BJ
Vaio VPCEB190X
Vaio VPCEA45FX/WI
Vaio VPCEA24FM/B
Vaio VPCEA2JFX/G
Vaio VPCEB2JFX/L
Vaio VPCEA21FD/BJ
Vaio VPCEB14FX/T
Vaio VPCEB4HGX/BJ
Vaio VPCEB23FM/WI
Vaio VPCEA3S1E/G
Vaio VPCEB3LFX/BJ
Vaio VPCEB1LFX
Vaio VPCEB11FX/BI
Vaio VPCEB2E1E/WI
Vaio VPCEA33FB
SONY Vaio VPCEB33GX/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB33GX/WI motherboard and SONY Vaio VPCEB33GX/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
