SONY Vaio VPCEB2M1E/PI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2m1e/pi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2m1e/pi system board.
Related Laptop Model:
Vaio VPCEB46FD/BJ
Vaio VPCEB46FX
Vaio VPCEA2WFX
Vaio VPCEB15FM/T
Vaio VPCEB4LFX/BJ
Vaio VPCEA4M1R/BJ
Vaio VPCEB1E1R/BJ
Vaio VPCEA3UFX/BJ
Vaio VPCEB3S1R/BQ
Vaio VPCEB1M1E/WI
Vaio VPCEB1KGX/W
Vaio VPCEA3L1E/G
Vaio VPCEB2RFX/B
Vaio VPCEB1MFX/BI
Vaio VPCEB2JFX/L
Vaio VPCEB1JFX/W
Vaio VPCEB24FX/BI
Vaio VPCEA27FL/P
Vaio VPCEB190X
Vaio VPCEA37FL/B
Vaio VPCEB37FX
Vaio VPCEB17FX/W
Vaio VPCEA3VFX/BJ
Vaio VPCEA43FB
Vaio VPCEB4E1E/WI
Vaio VPCEA40EL/L
Vaio VPCEB15FX/WI
Vaio VPCEB33FX/BJ
Vaio VPCEA2TGX/BI
Vaio VPCEB44FX/BJ
Vaio VPCEB15FM/WI
Vaio VPCEB1E0E/T
SONY Vaio VPCEB2M1E/PI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2M1E/PI motherboard and SONY Vaio VPCEB2M1E/PI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
