SONY Vaio VPCEB2E9R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2e9r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2e9r/wi system board.
Related Laptop Model:
Vaio VPCEB1AGGBI
Vaio VPCEB1S1R/WI
Vaio VPCEB4MFX/W
Vaio VPCEA27FL/B
Vaio VPCEB22FX/BI
Vaio VPCEB4FFX/BJ
Vaio VPCEB33GX/WI
Vaio VPCEB2HFX
Vaio VPCEA22FX/P
Vaio VPCEA3AFX/BJ
Vaio VPCEA2GFX
Vaio VPCEA290L
Vaio VPCEB1JFX/L
Vaio VPCEB2TGX
Vaio VPCEB1Z1E/B
Vaio VPCEB2LGX
Vaio VPCEB37FX/WI
Vaio VPCEB4BGX/BJ
Vaio VPCEB4F4E
Vaio VPCEB3G4E
Vaio VPCEB42FX
Vaio VPCEB3LFX/BJ
Vaio VPCEA3AFX
Vaio VPCEB1J1E/WI
Vaio VPCEB11FM/T
Vaio VPCEB4EFX/BJ
Vaio VPCEB1NFX/L
Vaio VPCEA2PGX/BI
Vaio VPCEB1E0E/WI
Vaio VPCEA3SFX/N
Vaio VPCEB24FX
Vaio VPCEB2KGX
SONY Vaio VPCEB2E9R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2E9R/WI motherboard and SONY Vaio VPCEB2E9R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
