SONY Vaio VPCEB2E1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2e1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2e1r/wi system board.
Related Laptop Model:
Vaio VPCEA33FX/W
Vaio VPCEB35FD/WI
Vaio VPCEB27FGW
Vaio VPCEB3CFX
Vaio VPCEA36FM/L
Vaio VPCEA3S1R/P
Vaio VPCEB17FX/P
Vaio VPCEB28FX/L
Vaio VPCEB27FD/B
Vaio VPCEA20EL
Vaio VPCEB3C4R
Vaio VPCEB1AGX/BI
Vaio VPCEA3C5E
Vaio VPCEB2JFX/G
Vaio VPCEB36GX
Vaio VPCEA3M1E/P
Vaio VPCEB3F4E
Vaio VPCEA33FD/P
Vaio VPCEB12FD/WI
Vaio VPCEB35FX
Vaio VPCEA43FX/T
Vaio VPCEB3M1E/BQ
Vaio VPCEA1Z1E/B
Vaio VPCEA2SGX/BI
Vaio VPCEA44FX/WI
Vaio VPCEB1TFX
Vaio VPCEA4M1R/WI
Vaio VPCEB37FD/P
Vaio VPCEB31FD/WI
Vaio VPCEA3L1E/W
Vaio VPCEB36GX/BJ
Vaio VPCEA45FL
SONY Vaio VPCEB2E1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2E1R/WI motherboard and SONY Vaio VPCEB2E1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
