SONY Vaio VPCEB2AFD/BQ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb2afd/bq motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb2afd/bq system board.
Related Laptop Model:
Vaio VPCEB2TGX/BI
Vaio VPCEA2M1R/PI
Vaio VPCEB16FX
Vaio VPCEA3CFX/L
Vaio VPCEA25FB
Vaio VPCEB2MGX/BI
Vaio VPCEA24FM/L
Vaio VPCEB13FGBI
Vaio VPCEA35FGW
Vaio VPCEB3MFX/BJ
Vaio VPCEB2C4E
Vaio VPCEB3BFX/W
Vaio VPCEA3CFX
Vaio VPCEB4HGX
Vaio VPCEB23FX/T
Vaio VPCEA3BFX/BJ
Vaio VPCEA4BGX
Vaio VPCEB31FX/WI
Vaio VPCEB47GM/T
Vaio VPCEB2M0E/T
Vaio VPCEB4MFX/L
Vaio VPCEB1SFX/BI
Vaio VPCEB2UFX/BI
Vaio VPCEB3E1E/PI
Vaio VPCEB2C5E
Vaio VPCEB11FM/BI
Vaio VPCEB27FX/G
Vaio VPCEB36GM
Vaio VPCEB1E1R/WI
Vaio VPCEA20EL
Vaio VPCEB4CGX
Vaio VPCEA3SFX/N
SONY Vaio VPCEB2AFD/BQ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB2AFD/BQ motherboard and SONY Vaio VPCEB2AFD/BQ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
