SONY Vaio VPCEB27FGW Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb27fgw motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb27fgw system board.
Related Laptop Model:
Vaio VPCEB35FD/T
Vaio VPCEA33FD/L
Vaio VPCEB11FD/WI
Vaio VPCEA27FL
Vaio VPCEA31FX/WI
Vaio VPCEB16FD/B
Vaio VPCEB24FX/WI
Vaio VPCEA3S1R/W
Vaio VPCEA3L1E/B
Vaio VPCEB1HFX/BI
Vaio VPCEA3M1E
Vaio VPCEA3S1E/P
Vaio VPCEB25FX/T
Vaio VPCEB4AFD/W
Vaio VPCEA23FB/G
Vaio VPCEB16FD/L
Vaio VPCEB12FD/W
Vaio VPCEA27FL/P
Vaio VPCEB15FX/BI
Vaio VPCEA25FB
Vaio VPCEB3AFX/WI
Vaio VPCEA3HGX/BJ
Vaio VPCEB2NGX/BI
Vaio VPCEA24FM/L
Vaio VPCEA3TFX/BJ
Vaio VPCEA43FB/P
Vaio VPCEA23FB/W
Vaio VPCEB1BGX
Vaio VPCEB1S1R/T
Vaio VPCEB16FX/B
Vaio VPCEB33GX/T
Vaio VPCEA4M1R/BJ
SONY Vaio VPCEB27FGW laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB27FGW motherboard and SONY Vaio VPCEB27FGW fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
