SONY Vaio VPCEB26GM/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb26gm/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb26gm/bi system board.
Related Laptop Model:
Vaio VPCEA33FB/B
Vaio VPCEA36FX/W
Vaio VPCEA23FB/B
Vaio VPCEB2JFX/B
Vaio VPCEB1E9E/BJ
Vaio VPCEB47GM/BJ
Vaio VPCEB35FGP
Vaio VPCEB190X
Vaio VPCEB1QGX/BI
Vaio VPCEB3M1R/T
Vaio VPCEA4AFX/B
Vaio VPCEB19FL/BI
Vaio VPCEB13EL/WI
Vaio VPCEB23FX/PI
Vaio VPCEA4S1E/V
Vaio VPCEB24FD/WI
Vaio VPCEA33FB/V
Vaio VPCEB4MFX/W
Vaio VPCEB4J1E/PI
Vaio VPCEA4AFX/P
Vaio VPCEB1S1E/WI
Vaio VPCEB4J1R/BQ
Vaio VPCEA33FB/L
Vaio VPCEB2E9E/BQ
Vaio VPCEB43FD/T
Vaio VPCEA2UFX/B
Vaio VPCEB1S0E/BJ
Vaio VPCEA25FX/WI
Vaio VPCEB1M1R/WI
Vaio VPCEB33FM/BJ
Vaio VPCEB29GX
Vaio VPCEA45FX
SONY Vaio VPCEB26GM/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB26GM/BI motherboard and SONY Vaio VPCEB26GM/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
