SONY Vaio VPCEB1SFX/BIC Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1sfx/bic motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1sfx/bic system board.
Related Laptop Model:
Vaio VPCEA25FX
Vaio VPCEB15FX
Vaio VPCEB4E0E/WI
Vaio VPCEA1S1E/G
Vaio VPCEB26FGP
Vaio VPCEA2UFX/W
Vaio VPCEA36FX/W
Vaio VPCEB4GFX/BJ
Vaio VPCEA33FD/P
Vaio VPCEB1M1E/T
Vaio VPCEB26GM/BI
Vaio VPCEB15FM
Vaio VPCEB15FM/T
Vaio VPCEB1EGX/BI
Vaio VPCEB27FX/P
Vaio VPCEB33FX/BJ
Vaio VPCEB24FX/BI
Vaio VPCEA36FX/L
Vaio VPCEB1AGX
Vaio VPCEA27FX/B
Vaio VPCEA37FX/W
Vaio VPCEA3MGX/BJ
Vaio VPCEA33FD/B
Vaio VPCEB4L1R/WI
Vaio VPCEB3JGX/BJ
Vaio VPCEB11FD/BI
Vaio VPCEB37FX/WI
Vaio VPCEB26FX/BI
Vaio VPCEA44FX/BJ
Vaio VPCEA27FL
Vaio VPCEA20EL/WI
Vaio VPCEB43FD
SONY Vaio VPCEB1SFX/BIC laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1SFX/BIC motherboard and SONY Vaio VPCEB1SFX/BIC fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
