SONY Vaio VPCEB1S1R/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1s1r/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1s1r/bj system board.
Related Laptop Model:
Vaio VPCEB31FX/WI
Vaio VPCEB4F4E
Vaio VPCEB2TFX/BI
Vaio VPCEB1J1E/WI
Vaio VPCEA33FX/P
Vaio VPCEB46FGL
Vaio VPCEA33FX/L
Vaio VPCEB4LFX
Vaio VPCEA27FL/L
Vaio VPCEA4BGX/BJ
Vaio VPCEA37FL/L
Vaio VPCEB2M1R/PI
Vaio VPCEA2JFX/P
Vaio VPCEB3LFX/BJ
Vaio VPCEB1LFX/WI
Vaio VPCEB32FX/WI
Vaio VPCEB4L1R/BQ
Vaio VPCEB2B4E
Vaio VPCEB14FX/T
Vaio VPCEB4KFX/BJ
Vaio VPCEA47FX/L
Vaio VPCEA33FD/L
Vaio VPCEB4M1E/PI
Vaio VPCEB35FX/WI
Vaio VPCEB24FD/L
Vaio VPCEA46FGW
Vaio VPCEA3SFX
Vaio VPCEA3LGX/BJ
Vaio VPCEB35FGP
Vaio VPCEB1SFX/BIC
Vaio VPCEB3PGX/BJ
Vaio VPCEB33GX/T
SONY Vaio VPCEB1S1R/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1S1R/BJ motherboard and SONY Vaio VPCEB1S1R/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
