SONY Vaio VPCEB1M1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1m1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1m1r/wi system board.
Related Laptop Model:
Vaio VPCEB1JFX/G
Vaio VPCEA1S1R/B
Vaio VPCEA24FM/W
Vaio VPCEB22FX/BI
Vaio VPCEB2C5E
Vaio VPCEB2A4E
Vaio VPCEB4CGX
Vaio VPCEB4EFX/BJ
Vaio VPCEA3KGX/BJ
Vaio VPCEA3BFX/T
Vaio VPCEA1C5E
Vaio VPCEA27FL/L
Vaio VPCEB2JFX/B
Vaio VPCEA31FX/T
Vaio VPCEB16FX/L
Vaio VPCEA36FM/V
Vaio VPCEB2HFX
Vaio VPCEB24FD/B
Vaio VPCEB21FD/WI
Vaio VPCEA3S1R/B
Vaio VPCEA2TGX/BI
Vaio VPCEB2JFX/L
Vaio VPCEB4MFX/B
Vaio VPCEA3SFX
Vaio VPCEB11FX
Vaio VPCEA45FL/V
Vaio VPCEA3HGX
Vaio VPCEA45FX/T
Vaio VPCEB33FD/B
Vaio VPCEB42FM/T
Vaio VPCEB3M1E/BQ
Vaio VPCEB4AFD/L
SONY Vaio VPCEB1M1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1M1R/WI motherboard and SONY Vaio VPCEB1M1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
