SONY Vaio VPCEB1M1E/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1m1e/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1m1e/bj system board.
Related Laptop Model:
Vaio VPCEB4L1R/WI
Vaio VPCEB2JFX/G
Vaio VPCEB29GL
Vaio VPCEB4E9R/BQ
Vaio VPCEB15FX
Vaio VPCEA2KGX/B
Vaio VPCEA37FL
Vaio VPCEB44FX
Vaio VPCEA2VGX
Vaio VPCEB3AFD/WI
Vaio VPCEA46FM
Vaio VPCEA4M1R/BJ
Vaio VPCEA25FB
Vaio VPCEB3M1E/WI
Vaio VPCEB1CGX/BI
Vaio VPCEB22FX
Vaio VPCEB37FD/P
Vaio VPCEA25FGP
Vaio VPCEA4AFX/L
Vaio VPCEA2KGX
Vaio VPCEB3LFX/BJ
Vaio VPCEA3S1R/P
Vaio VPCEB2LGX/BI
Vaio VPCEA3M1E/L
Vaio VPCEB3KFX/BJ
Vaio VPCEB1JFX/B
Vaio VPCEB35FD/BJ
Vaio VPCEB26GM/WI
Vaio VPCEB3CFX
Vaio VPCEB4CGX
Vaio VPCEB44FX/BJ
Vaio VPCEB36GM/BJ
SONY Vaio VPCEB1M1E/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1M1E/BJ motherboard and SONY Vaio VPCEB1M1E/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
