SONY Vaio VPCEB1M0E/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1m0e/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1m0e/wi system board.
Related Laptop Model:
Vaio VPCEB1NFX/W
Vaio VPCEA4AFX
Vaio VPCEB1KGX/W
Vaio VPCEA30EL/BI
Vaio VPCEB42FX/T
Vaio VPCEB15EL
Vaio VPCEB4HGX
Vaio VPCEB1M1E/T
Vaio VPCEA25FX/WI
Vaio VPCEB4AFX/BJ
Vaio VPCEB3CFX
Vaio VPCEB3F4E
Vaio VPCEB2M0E
Vaio VPCEB4J1E/WI
Vaio VPCEB37FX/WI
Vaio VPCEA45FL/P
Vaio VPCEB1E9R/BJ
Vaio VPCEB3NFX
Vaio VPCEB2TGX
Vaio VPCEA36FX/W
Vaio VPCEA2VGX
Vaio VPCEB25FX/WI
Vaio VPCEB1S0E
Vaio VPCEB27FX/B
Vaio VPCEB11FD/WI
Vaio VPCEB1S1E/WI
Vaio VPCEB1C5E
Vaio VPCEA27FX/B
Vaio VPCEA36FX/WI
Vaio VPCEB27FX/W
Vaio VPCEB3AFX/WI
Vaio VPCEB3AFD/BJ
SONY Vaio VPCEB1M0E/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1M0E/WI motherboard and SONY Vaio VPCEB1M0E/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
