SONY Vaio VPCEB1E9R/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1e9r/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1e9r/bj system board.
Related Laptop Model:
Vaio VPCEB24FX
Vaio VPCEB15EL
Vaio VPCEB14FX/T
Vaio VPCEB2YFX/BI
Vaio VPCEA3CFX
Vaio VPCEB11GX
Vaio VPCEB3L9E/BQ
Vaio VPCEB2JFX/B
Vaio VPCEB13FGBI
Vaio VPCEA45FL/W
Vaio VPCEB4HGX/BJ
Vaio VPCEB190S
Vaio VPCEB2LGX/BI
Vaio VPCEA27FX/W
Vaio VPCEA2SGX
Vaio VPCEB2S1R/PI
Vaio VPCEB13EL/WI
Vaio VPCEB14FX/BI
Vaio VPCEA3M1E
Vaio VPCEA3D4E
Vaio VPCEB1M1E/WI
Vaio VPCEB1A4E
Vaio VPCEB42FX/BJ
Vaio VPCEA2PGX/BI
Vaio VPCEB23FX
Vaio VPCEA47FX/P
Vaio VPCEA33FB/G
Vaio VPCEA36FM/W
Vaio VPCEA1S1E/W
Vaio VPCEB2M0E/T
Vaio VPCEB3BFX/W
Vaio VPCEA24FM/G
SONY Vaio VPCEB1E9R/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1E9R/BJ motherboard and SONY Vaio VPCEB1E9R/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
