SONY Vaio VPCEB1E1E/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb1e1e/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb1e1e/wi system board.
Related Laptop Model:
Vaio VPCEB24FD/L
Vaio VPCEA3M1R/BJ
Vaio VPCEB24FX/BI
Vaio VPCEB2AFD/BQ
Vaio VPCEB2M1E/PI
Vaio VPCEB2YFX
Vaio VPCEB46FX
Vaio VPCEB42FM/T
Vaio VPCEA24FM/W
Vaio VPCEB1RGX
Vaio VPCEB17FL/WI
Vaio VPCEA3LGX
Vaio VPCEB1E8E/WI
Vaio VPCEA23FB
Vaio VPCEB1E0E
Vaio VPCEB26GX/BI
Vaio VPCEB1AGX/BI
Vaio VPCEA3FFX/BJ
Vaio VPCEB1AGX
Vaio VPCEB17FX/W
Vaio VPCEB27FX/G
Vaio VPCEB43FX/WI
Vaio VPCEB2TFX
Vaio VPCEB4B4E
Vaio VPCEB43FX
Vaio VPCEA36FM/BJ
Vaio VPCEB2KGX
Vaio VPCEA21FD/PI
Vaio VPCEA3L1E/V
Vaio VPCEB29FL
Vaio VPCEB36GM/BJ
Vaio VPCEB33FD/BJ
SONY Vaio VPCEB1E1E/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB1E1E/WI motherboard and SONY Vaio VPCEB1E1E/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
