SONY Vaio VPCEB18FD/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb18fd/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb18fd/bi system board.
Related Laptop Model:
Vaio VPCEB25FL
Vaio VPCEA33FD/W
Vaio VPCEB3L1E/BQ
Vaio VPCEB1E9E/BJ
Vaio VPCEB3DFX
Vaio VPCEB28FX
Vaio VPCEA43FB/L
Vaio VPCEB1M1E
Vaio VPCEB1KGX/W
Vaio VPCEB23FM/BI
Vaio VPCEB2L9E/BQ
Vaio VPCEA47FX/G
Vaio VPCEB490X
Vaio VPCEB17FX/L
Vaio VPCEB2TFX
Vaio VPCEB2RFX/B
Vaio VPCEB27FD/P
Vaio VPCEB4L9E/BQ
Vaio VPCEB3LFX/BJ
Vaio VPCEB19FS
Vaio VPCEA22FX/W
Vaio VPCEA2LGX/BI
Vaio VPCEA2JFX/G
Vaio VPCEB190S
Vaio VPCEB37FD/B
Vaio VPCEA25FX/T
Vaio VPCEA3BFX
Vaio VPCEA31FX/T
Vaio VPCEB2RFX
Vaio VPCEB28FX/G
Vaio VPCEB24FX/BI
Vaio VPCEA31FX/WI
SONY Vaio VPCEB18FD/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB18FD/BI motherboard and SONY Vaio VPCEB18FD/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
