SONY Vaio VPCEB16FGL Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb16fgl motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb16fgl system board.
Related Laptop Model:
Vaio VPCEA21FD/PI
Vaio VPCEA25FX/WI
Vaio VPCEB3L9E/BQ
Vaio VPCEB4Z1E/BQ
Vaio VPCEB26FX/WI
Vaio VPCEB35FX/WI
Vaio VPCEB11FX/T
Vaio VPCEA23FB/P
Vaio VPCEA2TGX
Vaio VPCEB3E1R/WI
Vaio VPCEB16FD/L
Vaio VPCEA3BFX/WI
Vaio VPCEB3FGX/BJ
Vaio VPCEB19GX
Vaio VPCEB1LFX/WI
Vaio VPCEA36FX
Vaio VPCEB2JFX/W
Vaio VPCEB16FX/G
Vaio VPCEB32FX
Vaio VPCEB2G4E
Vaio VPCEA390X
Vaio VPCEB33FD/P
Vaio VPCEB2S1R/WI
Vaio VPCEB1M0E
Vaio VPCEB3M1R/T
Vaio VPCEB2NGX/BI
Vaio VPCEB14FX/T
Vaio VPCEB19FL/BI
Vaio VPCEA1S1E/L
Vaio VPCEA31FX/BJ
Vaio VPCEB12FD/W
Vaio VPCEB32FX/WI
SONY Vaio VPCEB16FGL laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB16FGL motherboard and SONY Vaio VPCEB16FGL fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
