SONY Vaio VPCEB16FD/G Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb16fd/g motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb16fd/g system board.
Related Laptop Model:
Vaio VPCEB4C4E
Vaio VPCEB3S1R/WI
Vaio VPCEA36FX/T
Vaio VPCEA3HGX/BJ
Vaio VPCEA2SGX
Vaio VPCEA36FX/W
Vaio VPCEB23FM
Vaio VPCEB3SGX/BJ
Vaio VPCEB42FX/T
Vaio VPCEB3HGX
Vaio VPCEB23FX/WI
Vaio VPCEB4E9R/BQ
Vaio VPCEB11GD/BI
Vaio VPCEB42FM/WI
Vaio VPCEA24FM/P
Vaio VPCEB3JGX
Vaio VPCEA37FX/B
Vaio VPCEA1S1R/B
Vaio VPCEB16FX/P
Vaio VPCEB43FD/WI
Vaio VPCEB4AFD/P
Vaio VPCEB35FD/T
Vaio VPCEB1A4E
Vaio VPCEA33FX
Vaio VPCEA2S1E/P
Vaio VPCEA3TFX
Vaio VPCEA35FL/B
Vaio VPCEA20FB/BI
Vaio VPCEB1S1R/T
Vaio VPCEB2E1R/WI
Vaio VPCEA36FX/L
Vaio VPCEB42FX/WI
SONY Vaio VPCEB16FD/G laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB16FD/G motherboard and SONY Vaio VPCEB16FD/G fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
