SONY Vaio VPCEB15EL Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb15el motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb15el system board.
Related Laptop Model:
Vaio VPCEB12FD/W
Vaio VPCEB25FX/WI
Vaio VPCEA3M1E/W
Vaio VPCEA4M1R/PI
Vaio VPCEA45FX
Vaio VPCEB2JFX/P
Vaio VPCEA2S1E/W
Vaio VPCEB1KGX/B
Vaio VPCEA3SFX/BQ
Vaio VPCEB18FD/BI
Vaio VPCEB4A4E
Vaio VPCEB33GX/BJ
Vaio VPCEB33FX/BJ
Vaio VPCEB4HGX
Vaio VPCEB1M0E/WI
Vaio VPCEB4EFX/BJ
Vaio VPCEA2S1R/G
Vaio VPCEA36FM/V
Vaio VPCEB290X
Vaio VPCEB3MFX
Vaio VPCEA25FGP
Vaio VPCEB1Z1E/B
Vaio VPCEB4AFX/BJ
Vaio VPCEB1CGX
Vaio VPCEA24FM/L
Vaio VPCEA23FB/B
Vaio VPCEA35FL/W
Vaio VPCEB24FD/W
Vaio VPCEB3L1E/T
Vaio VPCEA1S1E/B
Vaio VPCEA40EL/V
Vaio VPCEB4AFD/P
SONY Vaio VPCEB15EL laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB15EL motherboard and SONY Vaio VPCEB15EL fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
