SONY Vaio VPCEB15EL/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb15el/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb15el/bi system board.
Related Laptop Model:
Vaio VPCEA2S1R/P
Vaio VPCEA31FX/WI
Vaio VPCEA43FB/W
Vaio VPCEA3S1E/V
Vaio VPCEB29FL
Vaio VPCEB1Z0E/B
Vaio VPCEB24FD/PI
Vaio VPCEA4AFX/W
Vaio VPCEB31FD/BJ
Vaio VPCEA3S1E/P
Vaio VPCEA3FFX/BJ
Vaio VPCEA2VFX/W
Vaio VPCEB2SFX/W
Vaio VPCEA3S1R/L
Vaio VPCEB29GX
Vaio VPCEA490X
Vaio VPCEB3J1E/WI
Vaio VPCEA2S1E/W
Vaio VPCEA33FB/B
Vaio VPCEA43FX/T
Vaio VPCEB33GX/T
Vaio VPCEA2QGX/BI
Vaio VPCEB1C5E
Vaio VPCEA33FD/G
Vaio VPCEA2GFX/B
Vaio VPCEB2MGX
Vaio VPCEA1C5E
Vaio VPCEB190S
Vaio VPCEB28FX/P
Vaio VPCEB290L
Vaio VPCEA3L1E/L
Vaio VPCEB16FGL
SONY Vaio VPCEB15EL/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB15EL/BI motherboard and SONY Vaio VPCEB15EL/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
