SONY Vaio VPCEB14FD/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb14fd/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb14fd/bi system board.
Related Laptop Model:
Vaio VPCEB15EL/BI
Vaio VPCEB4X1E/BQ
Vaio VPCEA27FL/L
Vaio VPCEA36FX/BJ
Vaio VPCEB27FD/P
Vaio VPCEB31FX
Vaio VPCEA48FX
Vaio VPCEA24FM
Vaio VPCEA3HGX
Vaio VPCEB4AFX/BJ
Vaio VPCEA3UFX/BJ
Vaio VPCEB3Z1E/BQ
Vaio VPCEA37FX/G
Vaio VPCEB4LFX/BJ
Vaio VPCEB4CGX
Vaio VPCEB12FD/WI
Vaio VPCEA3M1E/G
Vaio VPCEB3H4E
Vaio VPCEB3FGX
Vaio VPCEB33FX/T
Vaio VPCEB4AFX/WI
Vaio VPCEA40EL/L
Vaio VPCEB2JFX/L
Vaio VPCEA33FB/L
Vaio VPCEB4L1R/T
Vaio VPCEA25FL
Vaio VPCEB4E9R/BQ
Vaio VPCEB1M1R/BJ
Vaio VPCEA2TGX
Vaio VPCEB3DFX
Vaio VPCEA31FX
Vaio VPCEB2M1R/WI
SONY Vaio VPCEB14FD/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB14FD/BI motherboard and SONY Vaio VPCEB14FD/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
