SONY Vaio VPCEB13EL/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb13el/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb13el/wi system board.
Related Laptop Model:
Vaio VPCEB16FD/G
Vaio VPCEB23FM/T
Vaio VPCEA27FL/P
Vaio VPCEA37FX/B
Vaio VPCEB3NFX
Vaio VPCEB43FD/T
Vaio VPCEA33FX/L
Vaio VPCEB3M1E/BQ
Vaio VPCEA2LGX/BI
Vaio VPCEB14FX/WI
Vaio VPCEA22FX/L
Vaio VPCEB3NFX/B
Vaio VPCEB3E1R/BQ
Vaio VPCEB33GX/WI
Vaio VPCEA46FM/G
Vaio VPCEB1S0E/WI
Vaio VPCEB27FD/P
Vaio VPCEB2JFX
Vaio VPCEB23FX/WI
Vaio VPCEA2KGX/L
Vaio VPCEA3M1E/G
Vaio VPCEA40EL/L
Vaio VPCEB13EL
Vaio VPCEB1GGX
Vaio VPCEB3J0E/WI
Vaio VPCEB12FD/W
Vaio VPCEB2E1R/BQ
Vaio VPCEB43FD/WI
Vaio VPCEB2AFD/BQ
Vaio VPCEA4CGX
Vaio VPCEA2LGX
Vaio VPCEB4B4E
SONY Vaio VPCEB13EL/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB13EL/WI motherboard and SONY Vaio VPCEB13EL/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
