SONY Vaio VPCEB12FD/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb12fd/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb12fd/bi system board.
Related Laptop Model:
Vaio VPCEB1FGX
Vaio VPCEB16FD
Vaio VPCEB12FD/W
Vaio VPCEB16FD/L
Vaio VPCEB10E0E
Vaio VPCEB3AFX/T
Vaio VPCEA25FX/WI
Vaio VPCEB3DFX
Vaio VPCEB1S1E/BJ
Vaio VPCEA3M1E/B
Vaio VPCEA2SGX/BI
Vaio VPCEA47FX/B
Vaio VPCEB4FFX
Vaio VPCEB33GX
Vaio VPCEB4AFD/V
Vaio VPCEA3VFX/BJ
Vaio VPCEB11GD
Vaio VPCEB35FD/BJ
Vaio VPCEA33FX/L
Vaio VPCEB1M0E
Vaio VPCEB32FX/BJ
Vaio VPCEB16FX/L
Vaio VPCEA2WGX
Vaio VPCEA21FD/WI
Vaio VPCEB2TFX/BI
Vaio VPCEB24FD/P
Vaio VPCEB2HFX
Vaio VPCEB35FX/WI
Vaio VPCEB1Z0E/B
Vaio VPCEB4KFX
Vaio VPCEB18FD/BI
Vaio VPCEA45FL/B
SONY Vaio VPCEB12FD/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB12FD/BI motherboard and SONY Vaio VPCEB12FD/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
