SONY Vaio VPCEB10E0E Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpceb10e0e motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpceb10e0e system board.
Related Laptop Model:
Vaio VPCEA4S1E/W
Vaio VPCEA46FGW
Vaio VPCEA290L
Vaio VPCEB1TFX/BI
Vaio VPCEA35FL/B
Vaio VPCEA3BFX/BJ
Vaio VPCEA290S
Vaio VPCEB2NGX
Vaio VPCEB3DFX/BJ
Vaio VPCEB2SFX/G
Vaio VPCEA3M1E/W
Vaio VPCEB4AFD/W
Vaio VPCEB24FD/T
Vaio VPCEB33FM
Vaio VPCEA27FX
Vaio VPCEB47GM/T
Vaio VPCEB3SGX
Vaio VPCEB1M0E/WI
Vaio VPCEB35FGP
Vaio VPCEA27FX/G
Vaio VPCEB3G4E
Vaio VPCEB46FD/BJ
Vaio VPCEB1SFX/BIC
Vaio VPCEB4MFX
Vaio VPCEB4J1E/PI
Vaio VPCEB2PGX/BI
Vaio VPCEA46FM/V
Vaio VPCEB33FX/T
Vaio VPCEB3M1R/T
Vaio VPCEA20FB/BI
Vaio VPCEB12FX/WI
Vaio VPCEB4AFX
SONY Vaio VPCEB10E0E laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEB10E0E motherboard and SONY Vaio VPCEB10E0E fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
