SONY Vaio VPCEA4S1E/P Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea4s1e/p motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea4s1e/p system board.
Related Laptop Model:
Vaio VPCEB25FX/BI
Vaio VPCEB4AFX
Vaio VPCEA37FL/L
Vaio VPCEA3CFX/L
Vaio VPCEA36FM/B
Vaio VPCEA3L1E/B
Vaio VPCEA23FB/P
Vaio VPCEB45FX/T
Vaio VPCEB33GX/BJ
Vaio VPCEB4FFX/BJ
Vaio VPCEA4DGX
Vaio VPCEA2M1R/PI
Vaio VPCEB2TFX/P
Vaio VPCEB4X1E/BQ
Vaio VPCEB13FX
Vaio VPCEB1HFX
Vaio VPCEB1E1R/WI
Vaio VPCEB24FD/W
Vaio VPCEB2GFX/B
Vaio VPCEA44FX/WI
Vaio VPCEA1S1E/G
Vaio VPCEB4J1E/WI
Vaio VPCEA2VGX/BI
Vaio VPCEB3GGX/BJ
Vaio VPCEB33FM/BJ
Vaio VPCEA31FX
Vaio VPCEB25FX
Vaio VPCEB3LFX
Vaio VPCEA1S1R/B
Vaio VPCEB29FS
Vaio VPCEA4S1E/G
Vaio VPCEA3AFX/WI
SONY Vaio VPCEA4S1E/P laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA4S1E/P motherboard and SONY Vaio VPCEA4S1E/P fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
