SONY Vaio VPCEA4S1E/B Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea4s1e/b motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea4s1e/b system board.
Related Laptop Model:
Vaio VPCEB1DGX
Vaio VPCEA23FB/P
Vaio VPCEA36FX/V
Vaio VPCEA25FB
Vaio VPCEB1KGX/W
Vaio VPCEA27FL/L
Vaio VPCEB35FX/BJ
Vaio VPCEA3M1R/WI
Vaio VPCEA2S1E/G
Vaio VPCEB13FX
Vaio VPCEA31FX
Vaio VPCEA3B4E
Vaio VPCEA2S1E/P
Vaio VPCEB3GGX/BJ
Vaio VPCEA3S1R/W
Vaio VPCEB44FX/WI
Vaio VPCEB18FD
Vaio VPCEA3BFX
Vaio VPCEA23FB/W
Vaio VPCEA43FX/BJ
Vaio VPCEB1FGX/BI
Vaio VPCEB2S1E/PI
Vaio VPCEA3AFX/BJ
Vaio VPCEA21FD/PI
Vaio VPCEA2VGX/BI
Vaio VPCEA3L1E/L
Vaio VPCEB42FX/WI
Vaio VPCEB23FM/T
Vaio VPCEA2JFX/L
Vaio VPCEB11GX
Vaio VPCEB12FX/WI
Vaio VPCEB21FGPI
SONY Vaio VPCEA4S1E/B laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA4S1E/B motherboard and SONY Vaio VPCEA4S1E/B fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
