SONY Vaio VPCEA4M1R/BJ Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea4m1r/bj motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea4m1r/bj system board.
Related Laptop Model:
Vaio VPCEA33FX/L
Vaio VPCEB17FB/B
Vaio VPCEA33FD/L
Vaio VPCEB3C4R
Vaio VPCEB37FX/BJ
Vaio VPCEB1HFX/BI
Vaio VPCEB31FGPI
Vaio VPCEA22FX
Vaio VPCEA46FM/L
Vaio VPCEA27FX/B
Vaio VPCEB1AGX/BI
Vaio VPCEB35FD/BJ
Vaio VPCEB14FX/BI
Vaio VPCEB2RFX/G
Vaio VPCEB3KFX
Vaio VPCEB17FX
Vaio VPCEA20EL/WI
Vaio VPCEB47GM/WI
Vaio VPCEB12FD/W
Vaio VPCEB4FFX
Vaio VPCEB3MFX/WI
Vaio VPCEA25FX/T
Vaio VPCEA1S1R/W
Vaio VPCEB31FX/BJ
Vaio VPCEB45FX/BJ
Vaio VPCEA3B4E
Vaio VPCEB13EL/WI
Vaio VPCEB24FX/PI
Vaio VPCEB2M0E/WI
Vaio VPCEB15EL/BI
Vaio VPCEA2MGX/BI
Vaio VPCEB3KFX/WI
SONY Vaio VPCEA4M1R/BJ laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA4M1R/BJ motherboard and SONY Vaio VPCEA4M1R/BJ fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
