SONY Vaio VPCEA45FL/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea45fl/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea45fl/w system board.
Related Laptop Model:
Vaio VPCEB33FX/T
Vaio VPCEB4X0E/BQ
Vaio VPCEB1JFX/G
Vaio VPCEA2JFX/G
Vaio VPCEB27FX/W
Vaio VPCEB3H4E
Vaio VPCEB23FX/PI
Vaio VPCEB2JFX/B
Vaio VPCEB4KFX/BJ
Vaio VPCEA2S1R/L
Vaio VPCEB24FD/W
Vaio VPCEB2L9E/BQ
Vaio VPCEA1S1R/L
Vaio VPCEB12FX/T
Vaio VPCEA2UFX
Vaio VPCEB1AGX
Vaio VPCEB11FM/WI
Vaio VPCEB24FD/PI
Vaio VPCEB21FGPI
Vaio VPCEB3M1R/WI
Vaio VPCEB24FD/P
Vaio VPCEB1M0E
Vaio VPCEB16FD
Vaio VPCEB2YFX/BI
Vaio VPCEB1EGX
Vaio VPCEA35FL/W
Vaio VPCEA2VGX/T
Vaio VPCEB29FL
Vaio VPCEA40EL/B
Vaio VPCEB33FD/P
Vaio VPCEB33FD/G
Vaio VPCEB42FX/BJ
SONY Vaio VPCEA45FL/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA45FL/W motherboard and SONY Vaio VPCEA45FL/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
