SONY Vaio VPCEA45FL/B Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea45fl/b motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea45fl/b system board.
Related Laptop Model:
Vaio VPCEA47FX/L
Vaio VPCEB1SFX/BI
Vaio VPCEB1M0E
Vaio VPCEBFX/G
Vaio VPCEA3S1R/G
Vaio VPCEB290L
Vaio VPCEA25FX/WI
Vaio VPCEB45FGP
Vaio VPCEA4DGX
Vaio VPCEB3B4R
Vaio VPCEB13EL/WI
Vaio VPCEA43FX/WI
Vaio VPCEA3M1E/G
Vaio VPCEB12FX/BI
Vaio VPCEB37FX/BJ
Vaio VPCEA45FX/WI
Vaio VPCEB3FGX/BJ
Vaio VPCEB16FX/G
Vaio VPCEA33FB/G
Vaio VPCEB29GS
Vaio VPCEB2AFD/WI
Vaio VPCEB26GX/BI
Vaio VPCEB1AFX/B
Vaio VPCEA2KGX/P
Vaio VPCEB3S1R/BQ
Vaio VPCEA2VGX/WI
Vaio VPCEA3KGX
Vaio VPCEB3L1E/PI
Vaio VPCEB36GM
Vaio VPCEA43FB/V
Vaio VPCEB1E8E/WI
Vaio VPCEA1Z1E
SONY Vaio VPCEA45FL/B laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA45FL/B motherboard and SONY Vaio VPCEA45FL/B fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
