SONY Vaio VPCEA43FB/G Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea43fb/g motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea43fb/g system board.
Related Laptop Model:
Vaio VPCEB42FM/BJ
Vaio VPCEA4AFX/V
Vaio VPCEA3UFX/BJ
Vaio VPCEA43FB/P
Vaio VPCEB33FM
Vaio VPCEB1KGX/B
Vaio VPCEB3E1E/PI
Vaio VPCEB3S1R/WI
Vaio VPCEB1A4E
Vaio VPCEB4MFX
Vaio VPCEA47FX/G
Vaio VPCEB2TFX/W
Vaio VPCEB4CGX
Vaio VPCEB1E8E/WI
Vaio VPCEB3M1R/T
Vaio VPCEB3HGX
Vaio VPCEA47FX/W
Vaio VPCEB3M1R/WI
Vaio VPCEB45FGP
Vaio VPCEB1CGX
Vaio VPCEA25FX/WI
Vaio VPCEB31FD/WI
Vaio VPCEA36FM/B
Vaio VPCEA47FX/V
Vaio VPCEB4S1E/BQ
Vaio VPCEB3D4E
Vaio VPCEA21FD/PI
Vaio VPCEB4BGX/BJ
Vaio VPCEA3UFX
Vaio VPCEB25FL/BI
Vaio VPCEB3L0E/BQ
Vaio VPCEB4AFD/V
SONY Vaio VPCEA43FB/G laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA43FB/G motherboard and SONY Vaio VPCEA43FB/G fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
