SONY Vaio VPCEA3M1R/WI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea3m1r/wi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea3m1r/wi system board.
Related Laptop Model:
Vaio VPCEA3LGX/BJ
Vaio VPCEB4J1E/WI
Vaio VPCEB42FX/T
Vaio VPCEA4DGX
Vaio VPCEB2G4E
Vaio VPCEB2E9R/BQ
Vaio VPCEB3AFD/BJ
Vaio VPCEB1HGX
Vaio VPCEB3Z1R/B
Vaio VPCEA3MGX/BJ
Vaio VPCEB1GGX
Vaio VPCEB290X
Vaio VPCEB4AFD/L
Vaio VPCEB46FX/T
Vaio VPCEB11FM/WI
Vaio VPCEB16FX/G
Vaio VPCEA2FFX/B
Vaio VPCEB31FD/BJ
Vaio VPCEB14FD/BI
Vaio VPCEA36FM/WI
Vaio VPCEA2JFX/L
Vaio VPCEB23FM/WI
Vaio VPCEB3E4E
Vaio VPCEB4EFX
Vaio VPCEB1C5E
Vaio VPCEB2RFX
Vaio VPCEA27FL/L
Vaio VPCEB1TGX
Vaio VPCEA2SGX
Vaio VPCEA4AFX/P
Vaio VPCEA35FL/P
Vaio VPCEB33FM/WI
SONY Vaio VPCEA3M1R/WI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA3M1R/WI motherboard and SONY Vaio VPCEA3M1R/WI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
