SONY Vaio VPCEA3L1E/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea3l1e/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea3l1e/w system board.
Related Laptop Model:
Vaio VPCEA3S1R/L
Vaio VPCEB37FGW
Vaio VPCEB42FX/BJ
Vaio VPCEB1M1E/WI
Vaio VPCEA37FX
Vaio VPCEB2M1E/PI
Vaio VPCEA2WGX
Vaio VPCEB37FD/P
Vaio VPCEB2M1R/PI
Vaio VPCEB2AFD
Vaio VPCEB3FGX
Vaio VPCEB3M1E/WI
Vaio VPCEB1C5E
Vaio VPCEB11GD/BI
Vaio VPCEA40EL/L
Vaio VPCEA43FB/P
Vaio VPCEB1E9R/WI
Vaio VPCEB27FX/B
Vaio VPCEB33FM/BJ
Vaio VPCEA3M1E/G
Vaio VPCEB3LFX/BJ
Vaio VPCEB3HGX/BJ
Vaio VPCEB33FX/T
Vaio VPCEA2UFX/L
Vaio VPCEA3A4E
Vaio VPCEA45FX/WI
Vaio VPCEB2E9E/BQ
Vaio VPCEA1S1R/G
Vaio VPCEB16FD/P
Vaio VPCEB15FB/BI
Vaio VPCEB2UFX
Vaio VPCEA36FM
SONY Vaio VPCEA3L1E/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA3L1E/W motherboard and SONY Vaio VPCEA3L1E/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
